Theory of Machines

81. Oldham's coupling is the

1. second inversion of double slider crank chain
2. third inversion of double slider crank chain
3. second inversion of single slider crank chain
4. third inversion of slider crank chain
5. fourth inversion of double slider crank chain.

View answer

82. Peaucellier mechanism has

1. eight links
2. six links
3. four links
4. twelve links
5. five links.

View answer

83. Pitch point on a cam is

1. any point on pitch curve
2. the point on cam pitch curve having the maximum pressure angle
3. any point on pitch circle
4. the point on cam pitch curve having the minimum pressure angle
5. none of the above.

View answer

84. Polar moment of inertia (IP) of ac disc is to ht determined by suspen by a wire and noting the frequei oscillations (/)

1. Ipocf
2. Ipocf
3. Ip oc j
4. Ipoc-
5. none of the above.

View answer

85. Pulley in a belt drive acts as

1. cylindrical pair
2. turning pair
3. rolling pair
4. sliding pair
5. surface pair.

View answer

86. Rectangular bar in a rectangular hole is the following type of pair

1. completely constrained motion
2. partially constrained motion
3. incompletely constrained motion
4. freely constrained motion
5. none of the above.

View answer

87. Rectilinear motion of piston is converted into rotary by

1. cross head
2. slider crank
3. connecting rod
4. gudgeon pin
5. four bar chain mechanism.

View answer

88. Relationship between the number of links (L) and number of pairs (P) is

1. P = 2L-4
2. P = 2L + 4
3. P = 2L+2
4. P = 2L-2
5. P = L-4.

View answer

89. Sense of tangential acceleration of a link

1. is same as that of velocity
2. is opposite to that of velocity
3. could be either same or opposite to velocity
4. is perpendicular to that of velocity
5. none of the above.

View answer

90. Shaft revolving in a bearing is the following type of pair

1. lower pair
2. higher pair
3. spherical pair,
4. cylindrical pair
5. bearing pair.

View answer